Unlocking Diagnostic Scantools & Networking Info: Tips for Accessing Vehicle Diagnostics
Diagnostics scantool and networking is a topic of great interest to many mechanics and aspiring electrical engineers. It can be difficult to find information related to vehicle diagnostics, scantool, and networking, but with some detective work it's possible to gain access to the necessary tools.
The R1T has an OBD2 port on the bottom left of the dash, however there are no CAN bus lines present. Instead, there are 4 Ethernet pins and an activation pin similar to many European cars that use DOIP. Power on pin 16, ground on pins 4 and 5. With this harness in place, unfortunately the vehicle does not respond to standard DOIP messaging without a Rivian scantool.
On the passenger side kick panel nearest the door at least 5 CAN bus networks were discovered. Unfortunately DBC files are not available for deciphering what they are saying. A pre-made OBD-ethernet harness for $25 from Rivian's official parts supplier is available through Snap-On tools. Service mode options such as E_SOE_pack_max, E_SOE_pack_user_real_max, Lifetime_enery_consumptopn_kwh, MFL_TorqueAvailableMotoring may also be accessed.
Diagnostic software remains elusive though, even after contacting Rivian customer service who denied any access to their certified diagnostics software or service info. The best option may be to reach out to repair shops in states with strong “right to repair” laws which mandate vehicle manufacturers allow unaffiliated people access to repair manuals and diagnostic tools/software.
Overall, accessing diagnostic scantools and networking information requires patience and detective work. Though Rivian customer service was unhelpful in providing access to their own certified software and service info, other resources such as pre-made OBD-ethernet harnesses and repair shops in “right to repair” states may provide more fruitful results. With some effort, it is possible to gain access to the necessary tools.
What is the OBD2 port layout on the R1T?
The OBD2 port is located on the bottom left of the dash. There are 4 Ethernet pins and an activation pin similar to many European cars that use DOIP. Power on pin 16, ground on pins 4 and 5.
Are there any CAN bus lines on the OBD2 port?
No, there are no CAN bus lines on the OBD2 port.
Where can I find CAN bus networks in the R1T?
CAN bus networks can be found in the passenger side kick panel nearest the door.
Is there a pre-made OBD-ethernet harness available for purchase?
Yes, a pre-made OBD-ethernet harness is available for $25 from Rivian's official parts supplier.
Does anyone have a list of service mode options available?
Yes, some service mode options include E_SOE_pack_max, E_SOE_pack_user_real_max, Lifetime_enery_consumptopn_kwh, MFL_TorqueAvailableMotoring.
Where can I get access to Rivian certified diagnostics software or service info?
You can reach out to Rivian customer service, however they may deny access to this information. Alternatively, you can try to find a repair shop in Massachusetts as they have a strong “right to repair” law that mandates vehicle manufacturers allow unaffiliated people be able to access repair manuals and diagnostic tools/software.
Are there any other diagnostic tools available?
Yes, there are a few other diagnostic tools available. Some of the most popular ones include Autel MaxiSys Pro, Launch X431 V+, and OBDLink MX+.
What is the best way to connect my laptop to the R1T for diagnostics?
The best way to connect your laptop to the R1T for diagnostics is through an OBD-ethernet harness. This will allow you to access the vehicle's onboard computer and run diagnostics without having to physically open up the car.
Are there any other networking options available?
Yes, you can also connect to the R1T through a Wi-Fi connection. This will allow you to access the vehicle's onboard computer and run diagnostics without having to physically open up the car. Additionally, you can also use Bluetooth or USB connections for data transfer.