Troubleshooting Unavailable Cruise Control on Your 2021 MSP
Cruise Control Unavailable
It can be frustrating when your car’s cruise control feature stops working. It is especially annoying if the problem occurs after you have just bought a new vehicle. This happened to one driver who purchased a 2021 MSP and drove it home with no issues, but then found that their cruise control was unavailable the next day.
The driver rebooted the car and disabled sentry mode, opened/closed all doors and frunk/trunk, but this did not solve the issue. The driver then replaced the USB stick inside the glove box with a different one and formatted the new one using the UI. This also failed to fix the issue.
When they started up the car, FSD visuals were back, but within 3 blocks it had disabled itself again. Dashcam recordings showed that all cameras were clean and crystal clear. The driver reset camera calibration, drove 15 miles, but still could not get it to work.
It appears as though something may be out of wack, and hopefully this is all it is as further troubleshooting may be required. If this does not fix the issue, contacting customer service or taking your car in for repair may be necessary.
In conclusion, if your cruise control suddenly becomes unavailable on your 2021 MSP, try replacing and formatting the USB stick, resetting camera calibration, and driving around for a while before contacting customer service or taking it in for repair.Hopefully, this will solve the issue.
What should I do if my 2021 MSP has Cruise Control unavailable message on the dash?
Replace the USB stick inside the glove box with a different one and format the new one using the UI. If that doesn't work, do a Dashcam recording and see if all of the camera views are working. The final step after that is recalibrating the cameras.
What could be causing my 2021 MSP to have Cruise Control unavailable message on the dash?
It could be due to a firmware issue or something out of wack with the lane keep assist system. It may also be due to nighttime calibration not being possible.
How can I reset the camera calibration for my 2021 MSP?
Reset the camera calibration by driving around 15 miles and make sure it never leaves 0 percent.
What should I do if Mobile Service or someone on the phone cannot troubleshoot my 2021 MSP?
Take the USB stick to the service center and ask for a new one. If that doesn't work, contact customer support and explain your situation in detail. They may be able to provide a solution.
How can I fix the Cruise Control unavailable message on my 2021 MSP?
First, check if the USB stick is properly inserted in the glove box. If it is, then try formatting the USB stick using the UI. If that doesn't work, do a Dashcam recording and see if all of the camera views are working. If they are, recalibrate the cameras. If that doesn't work, contact customer support.