Solving the BMW iX EZ Pass not Functioning Properly Issue
BMW iX EZ Pass Not Functioning Properly
The BMW iX has been reported to have issues with its EZ Pass not functioning properly, no matter where the tag is mounted on the windshield. It has been suggested that the transponder should be placed in the tinted area near the top of the windshield for it to work.
Many drivers have experienced this issue, including those with EZ Pass NY. One driver had placed their transponder lower down on the passenger side of the mirror, where it wasn’t tinted, and it didn’t work. After moving it up to the tinted area near the top of the mirror, it started working.
Another driver had racked up 20+ tickets due to the fact that when they placed the tag behind the mirror where it was not tinted, it would not work. It was then discovered that the tint being used in the iX was blocking the EZ pass signals. After placing the transponder in an area with no tint, it worked flawlessly.
It was also suggested that another place to mount the tag could be on the sunroof, however this was dismissed as it is also tinted with the same material as the windshield. It was then suggested that a license plate mount for an iPass could be ordered instead.
It was then discovered that this information was explicitly mentioned in the manual under “climate comfort windshield”, although it was almost impossible to find. Many cars with these windshields have similar placement requirements, and it has been noted that tags use UHF frequencies and windows can block these signals except for that area near the mirrors.
The BMW iX EZ Pass not functioning properly is a common issue, and it can be easily solved by placing the tag in the tinted area near the top of the windshield. It is important to note that this information was explicitly mentioned in the manual, although it was almost impossible to find.
It is also important to note that other cars with similar windshields may have similar placement requirements for their tags. If you are having issues with your EZ Pass not working, make sure to check your manual and place the tag in an area with no tint.
Is anyone else having issues with their BMW iX EZ Pass not functioning properly?
Yes, many people have experienced this issue. It is recommended to place the EZ Pass sticker in the tinted area near the top of the windshield for it to work properly.
Does placing the EZ Pass sticker in the tinted area near the top of the windshield work?
Yes, many people have reported that placing the EZ Pass sticker in the tinted area near the top of the windshield has worked for them.
Can I place my EZ Pass transponder behind the mirror where it is not tinted?
No, due to the fact that when placed in this area, majority of the time the tag would not work on the iX and only a handful of toll plazas can detect the tag. It is recommended to place it in the tinted area by the rear view mirror.
Can I place my EZ Pass transponder on my sunroof?
No, as it is likely tinted with the same material as the windshield and will block EZPass signals.
Is there any information about this placement requirement in the manual?
Yes, it is mentioned explicitly in the manual under “climate comfort windshield”. It states that the EZ Pass sticker should be placed in the tinted area near the top of the windshield for it to work properly.
Is there any other way to make sure my EZ Pass works?
Yes, you can try cleaning the windshield and the EZ Pass sticker with a soft cloth and window cleaner. This may help ensure that the signal is not blocked. Additionally, you can also check if the EZ Pass is working by driving through a toll plaza and seeing if it is detected.
What happens if I don't place my EZ Pass transponder correctly?
If you do not place your EZ Pass transponder correctly, it will not be detected by toll plazas and you will not be able to pay for tolls. This could lead to fines or other penalties.