Solve the Passenger Seat Issue with Rivian: Tips to Follow Until it is Resolved
Rivian's passenger seat occupancy sensors have been causing a lot of issues for drivers. Many people have reported that when their wife sits in the passenger seat, they get the "passenger airbag off" message and lose the passenger seat temperature controls. This issue seems to be related to the weight calibration being off, as it is set to 113 lbs to conform with the law that the airbag is automatically enabled above the weight of 5th percentile females. Unfortunately, this issue has been occurring for months now and Rivian has not yet resolved it. Some people have found that un-buckling and re-buckling the seat belt corrects the issue, but this is not a permanent solution. It would be nice if Rivian could handle this issue in a smarter way, such as preventing the airbags from disabling if the sensor is triggered on and off frequently. Hopefully, if more people report this issue, Rivian will take action and resolve it soon.
In the meantime, there are a few things drivers can do to help prevent this issue from occurring. First, make sure that the seat belt is properly buckled and not twisted or tangled. Second, if you have a child in the passenger seat, make sure they are properly secured in their car seat. Third, if you are carrying an item that may be heavier than 113 lbs, such as a laptop bag or briefcase, try to place it on the floor instead of the passenger seat. Finally, if you are having this issue frequently, consider taking your vehicle to a Rivian service center for further diagnosis and repair.
It's also important to note that this issue is not limited to Rivian vehicles. Other automakers have had similar issues with their airbag sensors in the past. For example, some Honda models have had issues with their weight calibration being off and triggering the airbag warning light. So if you're experiencing this issue with your Rivian vehicle, it's likely that other drivers have experienced it too.
Overall, it's clear that Rivian needs to address this issue quickly and effectively. It's understandable that they need to comply with safety regulations, but they should also be able to find a way to make sure their passengers are safe without disabling the airbags unnecessarily. In the meantime, drivers can take steps to minimize the chances of this issue occurring by making sure their seat belts are properly buckled and avoiding placing heavy items on the passenger seat. Hopefully Rivian will soon come up with a better solution so that drivers don't have to worry about this issue anymore.
Does anyone else have problems with the passenger seat occupancy sensors?
Yes, other Rivian owners have reported similar issues. The problem is that the airbag may be disabled when a passenger of a certain weight sits in the front seat.
Did this start after the Snow Mode update?
No, this issue has been present for months prior to the December software update.
Is there a way to prevent the airbags from disabling if the sensor is triggered on and off frequently?
Rivian should handle this in a smarter way, but currently un-buckling and re-buckling the seat belt can correct the issue.
What should I do if I experience this issue?
If you are experiencing this issue, it is recommended to report it to Rivian service so they can investigate further. You can also try un-buckling and re-buckling the seat belt to see if that helps.
Is there any way to fix this issue permanently?
Rivian is aware of this issue and is actively working on a software update to address it. Until then, un-buckling and re-buckling the seat belt should help in the short term.
Is there anything else I should know about this issue?
It's important to note that the airbag may be disabled even when a passenger of a certain weight is not sitting in the front seat. This could be due to an incorrect calibration of the occupancy sensor.