Reduce Wind Noise from your Car's Glass Roof - Self-Adhesive 3M Weather Stripping and More Solutions Explained
Tesla owners have long been familiar with the wind noise from the glass roof. This is caused by a gap between the glass and metal, which can be fixed using self-adhesive 3M weather stripping for $12 on Amazon. The Rivian RT1 has better fit and finish than any Tesla model, but some owners still report wind noise at the driver side window area. To fix this issue, one can use a 1/4" rubber gasket to fill in the gap or wrap the roof in body color. Other solutions include CITALL 118" Car Front Windshield Sunroof Windshield Edge Protector Trimmed Rubber Seal 300x1.5cm or removing crossbars when they are present.
Tesla vehicles have had an issue with wind noise coming from the glass roof due to a gap between the glass and metal. This can be easily remedied with self-adhesive 3M weather stripping that costs only $12 on Amazon.
The Rivian RT1 has superior craftsmanship compared to other Tesla models, yet some drivers still experience wind noise near the driver's side window area. To address this problem, you can install a 1/4" rubber gasket into the gap or cover the entire roof with body color paint. Another option is to purchase CITALL 118" Car Front Windshield Sunroof Windshield Edge Protector Trimmed Rubber Seal 300x1.5cm for additional protection against wind noise. Additionally, if you have crossbars on your vehicle, it may help to remove them as they might be causing excessive wind noise.
Overall, there are several ways to reduce wind noise coming from your car's glass roof. It is important to note that different cars may require different methods of fixing this issue, so it is best to do research before attempting any repairs yourself. In addition, always make sure that all safety precautions are taken when working on your car and follow manufacturer instructions closely.
Is there a fix for wind noise from the glass roof on Tesla models?
Yes, a self-adhesive 3M weather stripping can be purchased on Amazon for $12 and applied to the gap between the glass and metal to reduce wind noise.
Is there wind noise in the Rivian RT1?
Wind noise has been reported in numerous posts, mostly around the driver's side window area. It is recommended to open a claim with Rivian support if this issue is experienced.
Is there a way to reduce wind noise from the Rivian RT1?
A 1/4" rubber gasket can be squeezed into the gap between the glass and metal to reduce wind noise. Additionally, wrapping the roof in body color may also help reduce wind noise.
Are crossbars necessary for reducing wind noise on the R1S?
Crossbars may cause wind noise at speeds above 50MPH, so it is recommended to test drive without them first to determine if they are necessary. If wind noise persists, then crossbars may be necessary to reduce it.
Is there a way to reduce wind noise on the Tesla Model 3?
Yes, a self-adhesive 3M weather stripping can be purchased on Amazon for $13 and applied to the gap between the glass and metal to reduce wind noise. Additionally, wrapping the roof in body color may also help reduce wind noise.